河套盆地吉兰泰凹陷中生代构造层划分及意义     

杨德相  屈争辉  陈树光  李壮福  吴健平  王建广  武函 《高校地质学报》2020,26(6):691-703

2017年河套盆地临河坳陷油气勘探取得重要发现，基于区域中生代以来大地构造演化系统梳理，以钻井与地震对照、研究区与邻近盆地类比为研究方法，划分河套盆地临河坳陷南部吉兰泰凹陷中生代构造层，并绘制其分布范围，探讨其赋存特征与意义。结果表明：研究区中生界除三叠系外发育齐全，厚度巨大，且白垩系自上而下可细分为K1 ^I、K1 ^II和K1^III三个构造层；除K1I构造层全区广覆式发育外，其它构造层呈楔状—缓楔状，长轴沿主控断裂NNE向延伸；研究区自中生代以来盆地性质经历了早中侏罗世断陷、早白垩世早期断陷、早白垩世中期断拗转换和早白垩世晚期拗陷的演化过程；F ₃和F ₇断层之间的K1 ^II和K1 ^III构造层、F ₇断层东部的J构造层均具良好的油气勘探前景。  相似文献   

Deciphering late Devonian–early Carboniferous P–T–t path of mylonitized garnet-mica schists from Prins Karls Forland,Svalbard     

Karolina Kośmińska  Frank S. Spear  Jarosław Majka  Karol Faehnrich  Maciej Manecki  Karsten Piepjohn  Winfried K. Dallmann 《Journal of Metamorphic Geology》2020,38(5):471-493

Quartz-in-garnet inclusion barometry integrated with trace element thermometry and calculated phase relations is applied to mylonitized schists of the Pinkie unit cropping out on the island of Prins Karls Forland, western part of the Svalbard Archipelago. This approach combines conventional and novel techniques and allows deciphering of the pressure–temperature (P–T) evolution of mylonitic rocks, for which the P–T conditions could not have been easily deciphered using traditional methods. The results obtained suggest that rocks of the Pinkie unit were metamorphosed under amphibolite facies conditions at 8–10 kbar and 560–630°C and mylonitized at ~500 to 550°C and 9–11 kbar. The P–T results are coupled with in-situ Th–U-total Pb monazite dating, which records amphibolite facies metamorphism at c. 359–355 Ma. This is the very first evidence of late Devonian–early Carboniferous metamorphism in Svalbard and it implies that the Ellesmerian Orogeny on Svalbard was associated with metamorphism up to amphibolite facies conditions. Thus, it can be concluded that the Ellesmerian collision between the Franklinian margin of Laurentia and Pearya and Svalbard caused not only commonly accepted brittle deformation and weak greenschist facies metamorphism, but also a burial and deformation of rock complexes at much greater depths at elevated temperatures.  相似文献   

矿山地质环境评价中最佳评价尺度确定方法的研究及应用     

陈钰嘉  田淑芳 《现代地质》2020,34(3):626-634

矿山地质环境的评价对于矿产资源的开发利用、矿山环境的恢复治理有重要意义,在评价工作中最佳评价尺度的确定有助于提高评价结果的精确性和统一性。本次研究从矿山地质环境的评价内容出发,提出一种最佳评价尺度的确定方法。在不同尺度下,将评价区域按照边界划分成网格评价单元,通过定量化评价指标的尺度效应表现(异质性、一致性、信息量、破碎度),求出其随尺度变化的拟合函数,进而建立最佳评价尺度函数,并求出其评价适宜区间和最佳评价尺度。将该方法应用到福建省龙岩市新罗区、三明市大田县矿山地质环境评价中,得到新罗区和大田县的最佳评价尺度适宜区间分别为[997.8 m,1 194 m]、[955.5 m,1 297.8 m],最佳评价尺度分别为1 049.6 m、1 182.1 m。在该评价尺度区间内,所得到的评价结果基本一致,并且在最佳评价尺度下评价结果的效果更好,从而证明了该方法的可行性。研究表明,最佳评价尺度函数受到研究区范围、评价内容分布情况、自然地理情况等因素的综合影响。该研究成果可以为矿山地质环境评价工作中评价尺度的确定提供理论依据。  相似文献   

Effects of forest roads on the hydrological response of a small‐scale mountain watershed in Greece          下载免费PDF全文

K. X. Soulis  N. Dercas  CH. Papadaki 《水文研究》2015,29(7):1772-1782

The effects of land use changes on the ecology and hydrology of natural watersheds have long been debated. However, less attention has been given to the hydrological effects of forest roads. Although less studied, several researchers have claimed that streamflow changes related to forest roads can cause a persistent and pervasive effect on hillslope hydrology and the functioning of the channel system. The main potential direct effects of forest roads on natural watersheds hydrologic response are runoff production on roads surfaces due to reduced infiltration rates, interruption of subsurface flow by road cutslopes and rapid transfer of the produced runoff to the stream network through roadside ditches. The aforementioned effects may significantly modify the total volume and timing of the hillslope flow to the stream network. This study uses detailed field data, spatial data, hydro‐meteorological records, as well as numerical simulation to investigate the effects of forest roads on the hydrological response of a small‐scale mountain experimental watershed, which is situated in the east side of Penteli Mountain, Attica, Greece. The results of this study highlight the possible effects of forest roads on the watersheds hydrological response that may significantly influence direct runoff depths and peak flow rates. It is demonstrated that these effects can be very important in permeable watersheds and that more emphasis should be given on the impact of roads on the watersheds hydrological response. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Analysis of the contributions of topographic,soil, and vegetation features on the spatial distributions of surface soil moisture in a steep natural forested headwater catchment          下载免费PDF全文

Wei‐Li Liang  Sheng‐Lun Li  Feng‐Xu Hung 《水文研究》2017,31(22):3796-3809

Surface soil moisture has been extensively studied for various land uses and landforms. Although many studies have reported potential factors that control surface soil moisture over space or time, the findings have not always been consistent, indicating a need for identification of the main factors. This study focused on the static controls of topographic, soil, and vegetation features on surface soil moisture in a steep natural forested headwater catchment consisting of three hillslope units of a gully area, side slope, and valley‐head slope. Using a simple correlation analysis to investigate the effects of the static factors on surface soil moisture at depths of 0–20 cm at 470 points in 13 surveys, we addressed the characteristics of surface soil moisture and its main controlling factors. The results indicated that the mean of surface soil moisture was in the decreasing order of gully area > valley‐head slope > side slope. The relationship between the mean and standard deviation of surface soil moisture showed a convex‐upward shape in the headwater catchment, a negative curvilinear shape in the gully area, and positive curvilinear shapes at the side and valley‐head slopes. At the headwater catchment and valley‐head slope, positive contributions of soil porosity and negative contributions of slope gradient and saturated hydraulic conductivity were the main controlling factors of surface soil moisture under wetter conditions, whereas positive contributions of topographic wetness index and negative contributions of vegetation density were the main controlling factors of surface soil moisture under drier conditions. At the side slope underlain by fractured bedrocks, only saturated hydraulic conductivity and vegetation density were observed to be the controlling factors. Surface soil moisture in the gully area was mainly affected by runoff rather than were static features. Thus, using hillslope units is effective for approximately estimating the hydrological behaviours of surface moisture on a larger scale, whereas dependency between the main static factors and moisture conditions is helpful for estimating the spatial distributions of surface moisture on a smaller scale.  相似文献   

Understory and small trees contribute importantly to stemflow of a lower montane cloud forest          下载免费PDF全文

Teresa Margarita González‐Martínez  Guadalupe Williams‐Linera  Friso Holwerda 《水文研究》2017,31(5):1174-1183

Stemflow (Sf) measurements in tropical rain and montane forests dominated by large trees rarely include the understory and small trees. In this study, contributions of lower (1‐ to 2‐m height) and upper (>2‐m height and <5‐cm diameter at breast height [DBH]) woody understory, small trees (5 < DBH < 10 cm), and canopy trees (>10‐cm DBH) to Sf per unit ground area (Sf_a) of a Mexican lower montane cloud forest were quantified for 32 days with rainfall (P) during the 2014 wet season. Rainfall, stemflow yield (Sf_y), vegetation height, density, and basal area were measured. Subsequently, stemflow funneling ratios (SFRs) were calculated, and three common methods to scale up Sf_y from individual trees to the stand level (tree‐Sf_y correlation, P‐Sf_y correlation, and mean‐Sf_y extrapolation) were used to calculate Sf_a. Understory woody plants, small trees, and upper canopy trees represented 96%, 2%, and 2%, respectively, of the total density. Upper canopy trees had the lowest SFRs (1.6 ± 0.5 Standard Error (SE) on average), although the lower understory had the highest (36.1 ± 6.4). Small trees and upper understory presented similar SFRs (22.9 ± 5.4 and 20.2 ± 3.9, respectively). Different Sf scaling methods generally yielded similar results. Overall Sf_a during the study period was 22.7 mm (4.5% of rainfall), to which the understory contributed 70.1% (15.9 mm), small trees 10.6% (2.4 mm), and upper canopy trees 19.3% (4.4 mm). Our results strongly suggest that for humid tropical forests with dense understory of woody plants and small trees, Sf of these groups should be measured to avoid an underestimation of overall Sf at the stand level.  相似文献   

Zircon U–Pb ages and Hf isotope compositions of migmatites from the North Qinling terrane and their geological implications     

Q. Liu  Y.‐B. Wu  H. Wang  S. Gao  Z.‐W. Qin  X.‐C. Liu  S.‐H. Yang  H.‐J. Gong 《Journal of Metamorphic Geology》2014,32(2):177-193

Migmatites are predominant in the North Qinling (NQ) orogen, but their formation ages are poorly constrained. This paper presents a combined study of cathodoluminescence imaging, U–Pb age, trace element and Hf isotopes of zircon in migmatites from the NQ unit. In the migmatites, most zircon grains occur as new, homogeneous crystals, while some are present as overgrowth rims around inherited cores. Morphological and trace element features suggest that the zircon crystals are metamorphic and formed during partial melting. The inherited cores have oscillatory zoning and yield U–Pb ages of c. 900 Ma, representing their protolith ages. The early Neoproterozoic protoliths probably formed in an active continental margin, being a response to the assembly of the supercontinent Rodinia. The migmatite zircon yields Hf model ages of 1911 ± 20 to 990 ± 22 Ma, indicating that the protoliths were derived from reworking of Palaeoproterozoic to Neoproterozoic crustal materials. The anatexis zircon yields formation ages ranging from 455 ± 5 to 420 ± 4 Ma, with a peak at c. 435 Ma. Combined with previous results, we suggest that the migmatization of the NQ terrane occurred at c. 455–400 Ma. The migmatization was c. 50 Ma later than the c. 490 Ma ultra‐high‐P (UHP) metamorphism, indicating that they occurred in two independent tectonic events. By contrast, the migmatization was coeval with the granulite facies metamorphism and the granitic magmatism in the NQ unit, which collectively argue for their formation due to the northward subduction of the Shangdan Ocean. UHP rocks were distributed mainly along the northern margin and occasionally in the inner part of the NQ unit, indicating that they were exhumed along the northern edge and detached from the basement by the subsequent migmatization process.  相似文献   

Introducing a new conceptual instantaneous unit hydrograph model based on a hydraulic approach     

Setareh Khaleghi  Mohammad Parvin Nia 《水文科学杂志》2013,58(13-14):1967-1975

ABSTRACT

A novel approach is introduced for simulation of instantaneous unit hydrographs (IUHs). The model consists of a series of linear reservoirs that are connected to each other, and is referred to as the inter-connected linear reservoir model (ICLRM). By assuming the flow between two reservoirs is a linear function of the difference between the water levels in the reservoirs, a system of first-order linear differential equations is obtained as the ICLRM governing equation. By solving the equations, the discharge from the last reservoir is considered as an IUH. A small-scale laboratory device was constructed for the simulation of IUHs using the model. By studying four hydrographs extracted from the literature, and simulating them using both the ICLRM and the Nash model, it is concluded that the ICLRM can predict these hydrographs more accurately than the Nash model. Due to the simplicity of the construction and operation of the ICLRM and, more importantly, its visual aspect, the ICLRM may be considered as an effective educational tool for studying IUHs.  相似文献   

Reservoir rainfall‐runoff geomorphological model. II: analysis,calibration and validation     

M. Goñi  J. J. López  F. N. Gimena 《水文研究》2013,27(4):489-504

The model presented in the complementary document entitled, Reservoir rainfall‐runoff geomorphological model I: parameter application and analysis is analysed, calibrated and validated in this paper. The accuracy of simulated hydrographs is analysed by means of the efficiency defined by Nash and Sutcliffe. The sensitivity of the influence of five parameters on the behaviour of the model developed is analysed. Two different calibration and validation processes of Reservoir rainfall‐runoff geomorphological model are performed in Aixola watershed. Twelve events have been selected for calibrations and 25 for validations. With the first calibration and validation process, the model parameters are set by assigning the medians' values of the distributions obtained by means of the optimum results. The second process is performed by calibrating the most determinant parameter in the adjustment, which is the one that indicates the proportion of infiltrated water that is retained and does not flow; this is done with an empirical formulation depending on the event characteristics. Subsequently, the obtained results are validated. This last process has achieved very good adjustments in both calibrated and validated events. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Accounting for sparsely observed rainfall space—time variability in a rainfall—runoff model of a semiarid Tunisian basin/Prise en compte d'observations peu denses de la variabilité spatiotemporelle de la pluie dans une modélisation pluie—débit d'un bassin semi-aride Tunisien     

《水文科学杂志》2013,58(4)

Abstract

The management of water excesses and deficits is a major task in semiarid Mediterranean regions, where the variability of rainfall inputs is high at different time and space scales. Thus intense hydrometeorological events, which generate both potential resource and hazards, are of major interest. A simple method is proposed, with the example of the Skhira basin (192 km²) in central Tunisia, to account for the event space–time variability of rainfall in a rainfall–runoff model, in order to check its influence on the shape, magnitude and timing of resulting hydrographs. The transfer function used is a geomorphology-based unit hydrograph with an explicit territorial significance. Simulations made for highly variable events show the relevance of this method, seen as the first step of a downward approach, and its robustness with respect to the quality and the density of rainfall data.  相似文献